Use ultrasonic + neutral copper tape for RF cable fluid to clean the oxidized substances and oil stains on the Suzhou-copper surface to clean and strengthen the Suzhou-copper surface Attached. Clean the Suzhou-copper alloy before electroplating. If the Suzhou copper does not show bubbles, discoloration, and other defects after being out of the furnace, it is clear that the electroplating technology is no problem, and the next step of Suzhou copper electroplating can be carried out according to this technology. The interval between cleaning and electroplating technology should not be too long, that is to say,
electroplating immediately after cleaning. Combining many years of experience, our company’s recommendations regarding the electroplating of Suzhou-copper alloys are as follows: 1. 2. If there are problems such as bubbles, please consult the electroplating supplier for electroplating technical issues.
Before electroplating, it is advisable to electroplate the samples according to the existing electroplating technology of the electroplating factory, and place the electroplated Suzhou copper in a Copper Tape For Heat Exchanger vacuum furnace at 800° for 20 minutes for aging test. Suzhou copper is a two-phase ’pseudo alloy’ that combines metal Suzhou and metal copper. The cleaning agent prevents strong acids and alkalis. Because Suzhou metal is incompatible with other metals, the electroplating of Suzhou copper alloy is more difficult. 3
The characteristics of hardness, high melting point and anti-adhesion are often used to make projection welding and butt welding electrodes with certain wear resistance and high temperature resistance. Suzhou copper is an alloy of Suzhou and copper by using isostatic pressing forming-high temperature sintering Suzhou skeleton-dissolving copper technology. Its thermal expansion coefficient and electrical and thermal conductivity can be changed by adjusting the composition of the material, and then provide convenience for the use of materials . (4)
Electronic packaging materials have both the low swelling characteristics of Suzhou and the high thermal conductivity of copper. (2) When the copper clad aluminum tube EDM electrode is used for the mold made of Suzhou steel and high temperature resistant super hard alloy, the general electrode wears large and the speed is slow
https://www.fullwaytech.com/product/copper-strip-for-radio-frequency-cable-2.html
electroplating immediately after cleaning. Combining many years of experience, our company’s recommendations regarding the electroplating of Suzhou-copper alloys are as follows: 1. 2. If there are problems such as bubbles, please consult the electroplating supplier for electroplating technical issues.
Before electroplating, it is advisable to electroplate the samples according to the existing electroplating technology of the electroplating factory, and place the electroplated Suzhou copper in a Copper Tape For Heat Exchanger vacuum furnace at 800° for 20 minutes for aging test. Suzhou copper is a two-phase ’pseudo alloy’ that combines metal Suzhou and metal copper. The cleaning agent prevents strong acids and alkalis. Because Suzhou metal is incompatible with other metals, the electroplating of Suzhou copper alloy is more difficult. 3
The characteristics of hardness, high melting point and anti-adhesion are often used to make projection welding and butt welding electrodes with certain wear resistance and high temperature resistance. Suzhou copper is an alloy of Suzhou and copper by using isostatic pressing forming-high temperature sintering Suzhou skeleton-dissolving copper technology. Its thermal expansion coefficient and electrical and thermal conductivity can be changed by adjusting the composition of the material, and then provide convenience for the use of materials . (4)
Electronic packaging materials have both the low swelling characteristics of Suzhou and the high thermal conductivity of copper. (2) When the copper clad aluminum tube EDM electrode is used for the mold made of Suzhou steel and high temperature resistant super hard alloy, the general electrode wears large and the speed is slow
https://www.fullwaytech.com/product/copper-strip-for-radio-frequency-cable-2.html
Many are used to make electric corrosion copper for wires, cables, brushes, sparks, etc. Brass is an alloy composed of copper and zinc. Brass seamless pipes can be used for heat exchangers and condensers, low-temperature pipelines, and subsea transport pipes. Production of sheets, bars, bars, pipes, casting parts, etc.
It is an alloy of red copper, tin, and lead. Products with outstanding conductivity are required. Pure copper extracted from sulfide or oxide copper minerals can be used to make money and make utensils. It has good electrical and thermal conductivity, excellent Copper tape for cable plasticity, and is easy to make by hot and cold pressure. Brass has strong wear resistance. It is very suitable for casting various utensils.. Seamless copper tube made of brass is soft and wear-resistant.
The copper content is between 62% and 68%, and the plasticity is strong. That is red copper. If brass consisting of copper and zinc is called ordinary brass. The mechanical function of cutting is also outstanding. Such as copper alloys composed of lead, tin, manganese, nickel, lead, iron, silicon. After the creation of bronze, it immediately became popular, and since then human history has entered a new stage in the bronze age. It is also the earliest alloy in the history of metal casting.Red copper is pure copper, also known as red copper. Bronze is a huge creation in the history of mankind. Bronze has the characteristics of low melting point, high hardness, strong plasticity, bright color, etc. Special brass, also known as special brass, has high strength, high hardness and strong chemical resistance. If it is a variety of alloys composed of more than two elements, it is called special brass
https://www.fullwaytech.com/product/copper-strip-for-power-cable.html
It is an alloy of red copper, tin, and lead. Products with outstanding conductivity are required. Pure copper extracted from sulfide or oxide copper minerals can be used to make money and make utensils. It has good electrical and thermal conductivity, excellent Copper tape for cable plasticity, and is easy to make by hot and cold pressure. Brass has strong wear resistance. It is very suitable for casting various utensils.. Seamless copper tube made of brass is soft and wear-resistant.
The copper content is between 62% and 68%, and the plasticity is strong. That is red copper. If brass consisting of copper and zinc is called ordinary brass. The mechanical function of cutting is also outstanding. Such as copper alloys composed of lead, tin, manganese, nickel, lead, iron, silicon. After the creation of bronze, it immediately became popular, and since then human history has entered a new stage in the bronze age. It is also the earliest alloy in the history of metal casting.Red copper is pure copper, also known as red copper. Bronze is a huge creation in the history of mankind. Bronze has the characteristics of low melting point, high hardness, strong plasticity, bright color, etc. Special brass, also known as special brass, has high strength, high hardness and strong chemical resistance. If it is a variety of alloys composed of more than two elements, it is called special brass
https://www.fullwaytech.com/product/copper-strip-for-power-cable.html
The thermal conductivity of beryllium copper material has excellent thermal conductivity. Red copper, tungsten copper, forged red copper, aluminum bronze, phosphor bronze, cup copper. The molding cycle is shortened and the processing rate is improved; the mold wall temperature is uniformly uniform and the product is improved.
Quality; The mold structure is simplified due to the reduction of cooling pipes; It can increase the temperature of the material, then reduce the wall thickness of the product, and reduce the cost of the product. When the difference between the uniform stripping temperature and the uniform wall temperature of the mold is small (for example, when the mold parts are not easily cooled) Using beryllium copper mold material, the cooling time can be reduced by 40%. The mold wall temperature only drops by 15%; the characteristics of the above beryllium copper mold material will bring several benefits to the mold supplier using this material.
The thermal conductivity of beryllium copper material is conducive to controlling the temperature of plastic molds, and it is easier to wholesale power cable manufacturers control the molding cycle, together to ensure the uniformity of the mold wall temperature; if with steel Compared with the mold, the molding cycle of beryllium copper is much smaller, and the uniform temperature of the mold can be reduced by about 20%(Professional red copper, tungsten copper, forged red copper, aluminum bronze, phosphor bronze, cup copper). The copper used in brass rods is copper-zinc alloy, which has high strength, high hardness and strong chemical resistance. Brass seamless pipes can be used for heat exchangers and condensers, low-temperature pipelines, and subsea transport pipes. The shaft has a uniform bearing force and high bearing capacity. Bronze rods are made of copper by adding tin to the copper
https://www.fullwaytech.com/product/copper-strip-for-power-cable.html
Quality; The mold structure is simplified due to the reduction of cooling pipes; It can increase the temperature of the material, then reduce the wall thickness of the product, and reduce the cost of the product. When the difference between the uniform stripping temperature and the uniform wall temperature of the mold is small (for example, when the mold parts are not easily cooled) Using beryllium copper mold material, the cooling time can be reduced by 40%. The mold wall temperature only drops by 15%; the characteristics of the above beryllium copper mold material will bring several benefits to the mold supplier using this material.
The thermal conductivity of beryllium copper material is conducive to controlling the temperature of plastic molds, and it is easier to wholesale power cable manufacturers control the molding cycle, together to ensure the uniformity of the mold wall temperature; if with steel Compared with the mold, the molding cycle of beryllium copper is much smaller, and the uniform temperature of the mold can be reduced by about 20%(Professional red copper, tungsten copper, forged red copper, aluminum bronze, phosphor bronze, cup copper). The copper used in brass rods is copper-zinc alloy, which has high strength, high hardness and strong chemical resistance. Brass seamless pipes can be used for heat exchangers and condensers, low-temperature pipelines, and subsea transport pipes. The shaft has a uniform bearing force and high bearing capacity. Bronze rods are made of copper by adding tin to the copper
https://www.fullwaytech.com/product/copper-strip-for-power-cable.html
Bronze has the characteristics of low melting point, high hardness, strong plasticity, bright color and so on, which is very suitable for casting various utensils.’;.’Originally refers to copper-tin alloys, and copper alloys other than brass and cupronickel are all called bronzes, and are often named as the Copper Tape For Heat Exchanger first element of the list before the bronze name.. Bronze is a huge creation in human history After the creation of bronze, it immediately became popular, and human history has entered a new stage of the bronze era. Bronze can be divided into tin bronze and special bronze (ie Wuxi) Bronze) Two types. Red copper (also known as ’purple copper’), bronze (green gray or grayish yellow) are other from the color. Special bronze, participate in other elements to replace tin, or Wuxi bronze, most of the special bronzes have higher organic than tin bronze , Abrasion resistance and corrosion resistance, commonly used are aluminum bronze lead bronze, etc.
When not oxidized, the red copper is brighter than bronze, and the bronze is slightly bluish or yellowish dark; after oxidation, the red copper becomes black, and the bronze is greenish or chocolate. The red copper has good conductivity And thermal conductivity, excellent plasticity, easy to hot and cold pressure production, many are used to make wires, cables, brushes, electric spark copper for sparks and other products that require excellent conductivity.
Copper-tin alloys with tin as the main element, also known as tin bronze. Red copper is pure copper bronze It is slightly difficult to differentiateIn recent years, Laiwu City’s Gangcheng District has vigorously implemented the ’industrial development zone’ strategy, highlighted structural adjustments, accelerated industrial upgrading, and actively cultivated advantageous industrial clusters such as steel production and deep processing, new materials, machinery manufacturing, and auto parts, creating a nationwide * *** Stereoscopic intelligent garage production R \u0026 D base and steel powder production R \u0026 D base
https://www.fullwaytech.com/product/copper-strip-for-heat-exchanger.html
When not oxidized, the red copper is brighter than bronze, and the bronze is slightly bluish or yellowish dark; after oxidation, the red copper becomes black, and the bronze is greenish or chocolate. The red copper has good conductivity And thermal conductivity, excellent plasticity, easy to hot and cold pressure production, many are used to make wires, cables, brushes, electric spark copper for sparks and other products that require excellent conductivity.
Copper-tin alloys with tin as the main element, also known as tin bronze. Red copper is pure copper bronze It is slightly difficult to differentiateIn recent years, Laiwu City’s Gangcheng District has vigorously implemented the ’industrial development zone’ strategy, highlighted structural adjustments, accelerated industrial upgrading, and actively cultivated advantageous industrial clusters such as steel production and deep processing, new materials, machinery manufacturing, and auto parts, creating a nationwide * *** Stereoscopic intelligent garage production R \u0026 D base and steel powder production R \u0026 D base
https://www.fullwaytech.com/product/copper-strip-for-heat-exchanger.html
Compared with tungsten-copper, molybdenum-copper has the advantages of small quality, simple production, linear expansion coefficient, thermal conductivity, and some primary mechanical functions and appropriate tungsten-copper. 2. 1. The tungsten and molybdenum skeleton infiltration method first restricts the formation of tungsten powder or molybdenum powder, and sinters it into a tungsten and molybdenum skeleton with a certain porosity, and then infiltrates the copper. This method is applicable to tungsten copper and molybdenum copper products with low copper content.
The tungsten-copper or molybdenum-copper mixed powder is sintered in the liquid phase at 13001500° after limited molding. 3.The technical process of preparing tungsten-copper alloy by powder metallurgy method is to produce powder-making ingredients by mixing, limiting, forming, sintering, infiltrating and cooling. The oxide co-restoration method for preparing powder has a complicated technical process, low processing power, and difficulty in batch processing. Copper oxide powder method Copper oxide powder (mixing and grinding to restore copper) instead of using metallic copper powder,
Because of its high purity, the red copper is finely arranged, has a very low oxygen content, has no pores, trachoma, cracks, and impurities, and has Copper Tape For Power Cable good electrical conductivity. material. Copper sulfate can prevent diseases and insect pests in agriculture and forestry, suppressing the reproduction of many algae in water. The surface of the mold produced by electro-etching has a high surface finish.
After heat treatment, the electrode has no direction and is suitable for fine and fine hitting. It can be made into copper such as tubes, rods, wires, strips, strips, plates, foils, etc.. It has good electrical and thermal conductivity, excellent plasticity, and is easy to make by hot and cold pressure. Magnetic instruments and appearances that must be protected from magnetic disturbances, such as compasses and aviation appearances. Many are now used in the manufacture of wires, cables, brushes, electric spark erosion copper and other products that require excellent conductivity.Red copper is pure copper, also known as red copper
https://www.fullwaytech.com/product/copper-strip-for-power-cable.html
The tungsten-copper or molybdenum-copper mixed powder is sintered in the liquid phase at 13001500° after limited molding. 3.The technical process of preparing tungsten-copper alloy by powder metallurgy method is to produce powder-making ingredients by mixing, limiting, forming, sintering, infiltrating and cooling. The oxide co-restoration method for preparing powder has a complicated technical process, low processing power, and difficulty in batch processing. Copper oxide powder method Copper oxide powder (mixing and grinding to restore copper) instead of using metallic copper powder,
Because of its high purity, the red copper is finely arranged, has a very low oxygen content, has no pores, trachoma, cracks, and impurities, and has Copper Tape For Power Cable good electrical conductivity. material. Copper sulfate can prevent diseases and insect pests in agriculture and forestry, suppressing the reproduction of many algae in water. The surface of the mold produced by electro-etching has a high surface finish.
After heat treatment, the electrode has no direction and is suitable for fine and fine hitting. It can be made into copper such as tubes, rods, wires, strips, strips, plates, foils, etc.. It has good electrical and thermal conductivity, excellent plasticity, and is easy to make by hot and cold pressure. Magnetic instruments and appearances that must be protected from magnetic disturbances, such as compasses and aviation appearances. Many are now used in the manufacture of wires, cables, brushes, electric spark erosion copper and other products that require excellent conductivity.Red copper is pure copper, also known as red copper
https://www.fullwaytech.com/product/copper-strip-for-power-cable.html
The copper alloys of various compositions have different crystallization characteristics, different casting properties, and different casting process characteristics. The characteristics of the process are the sequential solidification process, the middle injection type pouring system, and the size of the dark riser is small. strips of copper fluidity in casting performance, easy to produce shrinkage, not easy to oxidize. Tin bronze: The crystallization characteristic is that the crystallization temperature range is wide and the solidification area is wide. Casting performance is the best (in special brass).
2. Silicon brass: The crystalline feature is between tin bronze and aluminum bronze. Aluminum bronze and aluminum brass: The crystallization characteristic is that the crystallization temperature range is small, which is the characteristic of layer-by-layer solidification. The characteristic of the process is that the aluminum bronze casting system is a bottom injection type, and the aluminum brass casting system is an open type. The process is characterized by directional solidification (sequential solidification) of thick-walled parts, and simultaneous solidification of complex thin-walled parts and general thick-walled parts. In terms of casting performance, it has good fluidity, easily forms concentrated shrinkage cavities, and is easily oxidized. 3. 1
Copper is a diamagnetic substance. (2) Good processing performance Plasticity is very good, easy to cold and hot forming; casting copper alloy has good casting performance.; excellent plasticity and easy to heat It can be made into copper materials such as tubes, rods, wires, strips, strips, plates, foils by pressing and cold pressure processing.). The density is 8-9g/cm and the melting point is 1083°C. Copper and copper alloys have high corrosion resistance to the atmosphere and water.(1) Excellent physical and chemical properties Pure copper has excellent electrical conductivity and thermal conductivity, and copper alloy has good electrical conductivity and thermal conductivity. Pure copper has good electrical conductivity and is widely used in the manufacture of wires, cables, brushes, etc.
https://www.fullwaytech.com/
2. Silicon brass: The crystalline feature is between tin bronze and aluminum bronze. Aluminum bronze and aluminum brass: The crystallization characteristic is that the crystallization temperature range is small, which is the characteristic of layer-by-layer solidification. The characteristic of the process is that the aluminum bronze casting system is a bottom injection type, and the aluminum brass casting system is an open type. The process is characterized by directional solidification (sequential solidification) of thick-walled parts, and simultaneous solidification of complex thin-walled parts and general thick-walled parts. In terms of casting performance, it has good fluidity, easily forms concentrated shrinkage cavities, and is easily oxidized. 3. 1
Copper is a diamagnetic substance. (2) Good processing performance Plasticity is very good, easy to cold and hot forming; casting copper alloy has good casting performance.; excellent plasticity and easy to heat It can be made into copper materials such as tubes, rods, wires, strips, strips, plates, foils by pressing and cold pressure processing.). The density is 8-9g/cm and the melting point is 1083°C. Copper and copper alloys have high corrosion resistance to the atmosphere and water.(1) Excellent physical and chemical properties Pure copper has excellent electrical conductivity and thermal conductivity, and copper alloy has good electrical conductivity and thermal conductivity. Pure copper has good electrical conductivity and is widely used in the manufacture of wires, cables, brushes, etc.
https://www.fullwaytech.com/
Copper belt processing procedures are relatively complex, generally copper belts are completed by automatic operation of the copper belt machine. But the mold of the copper belt machine occupies an important position at this time. The humanized design of the copper belt machine is easy to operate and can be operated at any time without training. The copper strip terminal is treated with special texture, after riveting, the tensile strength is extremely strong, and the quality is stable. Equipped with straight / bent mold base for connecting different products.
The important technical standard for crimping copper tape is actually not on the machine, but on the mold. Many molds of copper tape machine manufacturers are processed by general processing shops. The blades are cut directly by wire cutting. The international standard copper tape machine The blades of the molds are all ground with a grinder, and the molds are processed according to international requirements in the mold department of the factory, and the requirements for the molds are relatively high. Therefore, the quality of the copper strip is an important technical standard for the mold.
Complete decryption of the classification, performance and use of the copper strip
1. The origin of the red copper belt:
Purple copper belt got its name because of its purple-red color. It is not necessarily pure copper. Sometimes a small amount of deoxidizing elements or other elements are added to improve the material and performance, so it is also classified as a copper alloy.
2. Classification of copper clad steel strips factory:
Commonly used copper alloys are divided into four categories: brass, bronze, cupronickel, and copper.
Copper belts are classified into 2 types: ordinary copper belts and special copper belts.
https://www.fullwaytech.com/product/copper-clad-aluminium-copper.html
The important technical standard for crimping copper tape is actually not on the machine, but on the mold. Many molds of copper tape machine manufacturers are processed by general processing shops. The blades are cut directly by wire cutting. The international standard copper tape machine The blades of the molds are all ground with a grinder, and the molds are processed according to international requirements in the mold department of the factory, and the requirements for the molds are relatively high. Therefore, the quality of the copper strip is an important technical standard for the mold.
Complete decryption of the classification, performance and use of the copper strip
1. The origin of the red copper belt:
Purple copper belt got its name because of its purple-red color. It is not necessarily pure copper. Sometimes a small amount of deoxidizing elements or other elements are added to improve the material and performance, so it is also classified as a copper alloy.
2. Classification of copper clad steel strips factory:
Commonly used copper alloys are divided into four categories: brass, bronze, cupronickel, and copper.
Copper belts are classified into 2 types: ordinary copper belts and special copper belts.
https://www.fullwaytech.com/product/copper-clad-aluminium-copper.html
